Frigidaire Dishwasher Not Starting or Won't Latch
A Frigidaire dishwasher that is not starting is usually locked, waiting, or not latched. Child Lock or Delay Start is on, START was pressed but the door was not closed straight after, or the door latch is not catching, and the machine will not run a cycle until it does. Check those first, then power and water. If the door will not close or latch at all, the latch, the gasket or something in the way is the cause.
- What it means
- The control is not getting the signals it needs to run: door latched, no lock or delay set, power and water on
- Check first
- Child Lock and Delay Start, then press START and close the door straight away
- Display dark?
- Check the breaker, the fuse and the power cord
- Door won't latch?
- Look for a rack, utensil or the gasket in the way before blaming the latch
- Labour
- From $180
- Parts
- Priced after the diagnosis, before any work starts
- Diagnostic visit
- $79, waived when you go ahead with the repair
- Where we work
- Toronto, North York, York, East York, Etobicoke and Mississauga
Why won't my Frigidaire dishwasher start or turn on?
A Frigidaire dishwasher starts only when several conditions are met at the same moment. Frigidaire's support pages put it plainly: the unit will not start unless the door is securely shut and latched, it will not run unless water is reaching it, and if Delay Start is on it will wait until the set time. Child Lock blocks the buttons completely, so a locked panel looks exactly like a dead machine.
The sequence matters too. You choose the cycle, press START, then close the door immediately. Frigidaire notes that if you leave the door open too long you may have to reselect the cycle, and if you open the door mid-cycle you need to press START again once it is closed. Many "it won't start" calls end right there.
When the display stays completely dark, the problem is power rather than settings: a tripped breaker, a blown fuse, an unplugged cord under the sink or, on many models, a failed thermal fuse or control board.
Frigidaire dishwasher door not closing or latching
If the door will not close or latch, something is usually stopping it from reaching the catch. A lower rack that is off its track, a tall pan or utensil poking past the rack, or a gasket that has slipped out of its channel will all hold the door a few millimetres open. That is enough for the latch to miss and for the dishwasher to refuse to start.
When nothing is in the way and the door still will not catch, the latch assembly itself is the usual cause. On many models the latch also holds the door switch that tells the control the door is shut, so a worn latch can close firmly and still never report "closed". A dishwasher that has shifted in its opening, so the door no longer lines up with the strike, gives the same symptom.
What stops a Frigidaire dishwasher from starting?
| Cause | What you notice | What fixes it |
|---|---|---|
| Child Lock on | Buttons do nothing; a lock light is lit or the display shows "loc" | Switching Child Lock off with the Delay Start button |
| Delay Start set or START not pressed | Display is lit but the machine stays quiet | Cancelling the delay, pressing START and closing the door straight away |
| Something blocking the door | Door springs back or will not click shut | Reseating the rack, moving the item, pushing the gasket back into place |
| No power | Display completely dark | Resetting the breaker or fuse, plugging the cord back in |
| Worn door latch or door switch | Door closes, nothing happens; or the door will not latch at all | Replacing the latch assembly |
| Control board or thermal fuse | Power reaches the machine but the panel stays dead or acts randomly | Testing and replacing the failed part; the least common cause |
How to get a Frigidaire dishwasher to start yourself
Most of these take a minute. Work through them in order:
- Check Child Lock. On plastic-tub models Frigidaire says to press and hold Delay Start for 3 seconds to lock or unlock; a light on the lock pad shows it is on. On stainless-tub models the display shows "loc", and pressing Delay Start until "loc" disappears releases it.
- Cancel Delay Start. Hold CANCEL until the unit resets, then choose your cycle again.
- Press START, then close the door immediately. Push the door until you hear the latch click.
- Clear the door path. Make sure the lower rack is on its rails, nothing sticks out past the racks, and the gasket sits flat in its groove.
- Check power. If the display does not light up, check the breaker and fuse, and make sure the cord under the sink is still plugged in.
- Check water. Make sure the supply valve under the sink is open. Frigidaire also notes that a badly installed or clogged drain hose can stop the unit from starting.
Call a technician if the display stays dark with power at the outlet, if the door is clear but will not latch, if the door latches but nothing happens, or if the latch is cracked or loose. If the dishwasher was installed within the last 30 days, Frigidaire says to contact your installer first.
What we see on Frigidaire dishwasher start and latch calls
- Where
- Toronto, North York, York, East York, Etobicoke and Mississauga
- Machine
- Frigidaire built-in dishwashers
- Technician
- Andrew, appliance repair technician, 4+ years in the field
“When a Frigidaire dishwasher won't start, the first thing I check is whether the door latch actually clicks and tells the control the door is shut, because nothing runs until it does.”— Andrew, our technician on these calls
Do you fix Frigidaire dishwashers in my area?
Yes. We repair Frigidaire dishwashers in Toronto, North York, York, East York, Etobicoke and Mississauga, and we fix Frigidaire appliances across the rest of the GTA and Simcoe County: 29 areas, same day in most of them, seven days a week, with no travel surcharge.
Questions we get about Frigidaire dishwashers that won't start
Why is my Frigidaire dishwasher reset not working?
Holding CANCEL until the unit resets clears a delayed or interrupted cycle, but it will not get past Child Lock, a door that is not latched, or a lack of power or water. Check those first, then choose the cycle, press START and close the door straight away. If the panel still does not respond, the latch or the control needs a diagnosis.
Why does my Frigidaire dishwasher have no power?
Start with the breaker, the fuse and the power cord under the sink, because a dark display usually means no power is reaching the machine. If the outlet or circuit is live and the display is still dark, on many models a thermal fuse or the control board has failed, and that needs a technician.
How do I reset a Frigidaire dishwasher door latch?
A latch has no reset of its own. Clear anything holding the door open, such as a rack off its rails, a tall pan or a loose gasket, then close the door firmly until it clicks. If the door is clear and still will not latch, or it latches but the dishwasher does not start, the latch assembly usually needs replacing.
How much does it cost to fix a Frigidaire dishwasher that won't start?
Labour starts at $180. The part depends on what the diagnosis finds, so we price it once we know what failed. The $79 diagnostic is waived when you go ahead.